Bonifield &
Rosenstengel
Get your free consultation today!

618-215-2412 local

866-223-2525 toll free

Factory workers face many hazards on the job, some of which are due to the type of work they do and the items they are producing. No matter what type of factory you work in, there are several tips that can help you to remain safe. All of these must be part of the safety protocol the company uses.

Many factory employees receive safety training when they are going through a new hire orientation, but there might not be any subsequent reminders. It is imperative that you don't let safety fall by the wayside as you work.

Proper training is a must

Using machines in the factory means that you need to be properly trained on them. Never use one unless you have been. You should also receive safety training on other aspects of working in the facility, including basic housekeeping duties you are expected to perform in your area. Some factories have instituted toolbox talks once per shift or once per week as a way for employees to brush up on basic safety protocol.

Safety gear is always necessary

You should have any safety gear required for your job. This might include steel-toed boots, face shields, goggles, earplugs, certain clothing items or hardhats. Some of these are probably provided by your employer, but you might have to buy some items like the boots. It is never acceptable for you to have to do a job without the proper safety equipment if it is supposed to be provided by the company, and your supervisors shouldn't allow you to work if you don't have the items you are responsible for brining.

Practice proper body mechanics

You have to pay attention to your body as you move about. Make sure that you use good posture and that you don't bend or twist while lifting in a way that might result in an injury. Try to stretch before you go to work to give your muscles a chance to warm up. You also need to ensure that you take regular breaks so that you don't become fatigued and start making mistakes while you work.

Report unsafe conditions immediately

You should report any unsafe conditions to your supervisor immediately. This gives them an opportunity to correct the issue before someone gets hurt. If you suffer an injury at work, you should report that immediately so you can get the medical care you need. You might be able to receive workers' compensation benefits. However, a third-party lawsuit may be appropriate if your injury was due to a defective piece of equipment or component.

No Comments

Leave a comment
Comment Information
Email Us For A Response

Schedule Your Free Consultation Please call 866-223-2525 or complete the intake form below

Bold labels are required.

Contact Information
disclaimer.

The use of the Internet or this form for communication with the firm or any individual member of the firm does not establish an attorney-client relationship. Confidential or time-sensitive information should not be sent through this form.

close

Privacy Policy

Bonifield & Rosenstengel
16 East Main Street
Belleville, IL 62220

Toll Free: 866-223-2525
Phone: 618-215-2412
Fax: 618-277-5155
Belleville Law Office Map